ADJ, HANDLE, COMPRESSION,
|
|
|
ADJ, HANDLE, COMPRESSION, |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | LABEL, SERIAL NO, INSTINCT | 1 | 2 | PAD, SEAT, IN-B7201 | 1 | 3 | CAP,FLAT,ELLlPSE TUBE, IOOX50 | 2 | 4 | GASKET, FEET BASE, IN-B7503 | 3 | 5 | NLA PAD, BACK REST, IN-S1012 | 1 | 6 | Assembly, SPRING PIN, LONG, IN- | 2 | 7 | SHROUD, REAR, IN-D3340 | 1 | 8 | LOGO, STARTRAC | 2 | 9 | LOGO, INSTINCT | 1 | 10 | LOGO, CAUTION, PINCH POINT | 1 | 11 | PLACARD, INSTRUCTION, IN-D2110 | 1 | 12 | CAP, END, HANDLE | 2 | 13 | SLEEVE, STOPPER, IN-D1013 | 2 | 14 | STOPPER, 00 17MM, HGH 10.5MM | 4 | 15 | SHROUD, UPPER | 2 | 16 | End cap | 4 | 17 | WEIGHT STACK, FRAME | 1 | 18 | SUPPORT, FRAME, CENTER | 1 | 19 | SUPPORT, FRAME, TOP | 1 | 20 | ARM, SHORT, IN-D2110 | 2 | 21 | SEATPOST, EXTENSION, ADJUST- | 1 | 22 | SHROUD, MOUNTING, U STYLE, | 6 | 23 | NUT, M6, JAM, HEX, SS | 2 | 24 | SCREW,M8XI.25,20MM,SHCS,HE,SS | 4 | 25 | SCREW,M8XI.25,30MM,SHCS,HE,SS | 1 | 26 | SCREW, M8X55, SHS, SS | 1 | 27 | SCREW, M6X12, BHC, SS | 2 | 28 | WASHER, M10, SPLIT, LOCK, SS | 3 | 29 | WASHER, M10, FLAT, SS | 29 | 30 | Washer | 8 | 31 | ADJ, HANDLE, COMPRESSION, | 1 | 32 | Extension,, Handle, Adj | 1 | 33 | Assembly, ADJ HANDLE END, SLEEVE | 1 | 34 | Sleeve, Tube, Insert | 2 | 35 | SUPPORT, CAM, TOP PLATE | 1 | 36 | SPACER, SLEEVE, M16X20 | 1 | 37 | PULLEY, 89MM | 5 | 38 | NUT, M8, NYLON PATCH, SS | 5 | 39 | Nut, Nylon | 13 | 40 | Screw | 6 | 41 | Screw | 5 | 42 | SCREW,MI0XI.5,35MM,BHC,HE,SS | 4 | 43 | SCREW, M10X70, BHC, SS | 2 | 44 | SCREW, M10X250, BH, SS | 2 | 45 | SCREW, M10X55, BHC, SS | 3 | 46 | Screw | 6 | 47 | Screw | 8 | 48 | SPACER, 20.5ID X 12MM | 6 | 49 | CAM, IN-D2110, LEFT | 1 | 50 | CAM, IN-D2110, RIGHT | 1 | 51 | SHAFT, 25.4 OD X 69MM | 2 | 52 | PLATE, ADJUSTMENT, IN-D2110 | 2 | 53 | ARM, IN-D2110, LEFT | 1 | 54 | ARM, IN-D2110, RIGHT | 1 | 55 | HANDLE, RUBBER, GRIP, SLEEVE | 4 | 56 | GASKET, BASE HANDLE, IN-D2110 | 2 | 57 | SHROUD, LNL, D2110 | 1 | 58 | WSA, LNL, 180LB, 15H, SP | 1 | 59 | WASHER, M11 X 38OD | 6 | 60 | BUMPER, STACK, 25.4MM | 2 | 61 | STICKER,ADJUST FUNCTION,INSTRUCTION | 2 | 62 | STICKER,ADJUST FUNCTION,INSTRUCTION | 2 | 63 | LABEL, INSTR, LNL | 1 | 64 | PAD,FOOT,FRAME,WELDED | 1 | 65 | RETAINING SNAP, HOLE DIA 47MM | 8 | 66 | Assembly, CABLE, IN-D2110 (3835MM) | 1 | 67 | SLEEVE,STOPPER | 2 | 68 | BRACKET, MOVING, PULLEY | 1 | 69 | BUSHING, 1.0, BRONZE | 4 | 70 | WEIGHT STACK, GUIDE ROD, D2110 | 2 | 71 | BEARING, 6004 | 8 | 72 | SCREW,M4XO 7,15MM,SHCS,HE,SS | 2 | 73 | NUT, FLANGE, 1/2" - 12 | 2 | |
|
