Assembly, ADJ HANDLE END, SLEEVE
|
|
|
Assembly, ADJ HANDLE END, SLEEVE |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | LABEL, SERIAL NO, INSTINCT | 1 | 2 | PAD, SEAT, IN-B7201 | 1 | 3 | CAP,FLAT,ELLlPSE TUBE, IOOX50 | 2 | 4 | GASKET, FEET BASE, IN-B7503 | 3 | 5 | Assembly, Weight Stack Pin | 1 | 6 | NLA PAD, BACK REST, IN-S1012 | 1 | 7 | NLA SHROUD, FRONT, IN-D2110 | 1 | 8 | Assembly, SPRING PIN, LONG, IN- | 2 | 9 | SHROUD, REAR, IN-D3340 | 1 | 10 | LOGO, STARTRAC | 2 | 11 | LOGO, INSTINCT | 1 | 12 | LOGO, CAUTION, PINCH POINT | 1 | 13 | PLACARD, INSTRUCTION, IN-D2110 | 1 | 14 | WSB MAIN, (WSI) +(WS3) +(3 x WS5) | 1 | 15 | CAP, END, HANDLE | 2 | 16 | SLEEVE, STOPPER, IN-D1013 | 2 | 17 | STOPPER, 00 17MM, HGH 10.5MM | 4 | 18 | SHROUD, UPPER | 2 | 19 | End cap | 4 | 20 | WEIGHT STACK, FRAME | 1 | 21 | SUPPORT, FRAME, CENTER | 1 | 22 | SUPPORT, FRAME, TOP | 1 | 23 | ARM, SHORT, IN-D2110 | 2 | 24 | SEATPOST, EXTENSION, ADJUST- | 1 | 25 | SHROUD, MOUNTING, U STYLE, | 6 | 26 | NUT, M6, JAM, HEX, SS | 2 | 27 | SCREW,M8XI.25,20MM,SHCS,HE,SS | 4 | 28 | SCREW,M8XI.25,30MM,SHCS,HE,SS | 1 | 29 | SCREW, M8X55, SHS, SS | 1 | 30 | SCREW, M6X12, BHC, SS | 2 | 31 | WASHER, M10, SPLIT, LOCK, SS | 3 | 32 | WASHER, M10, FLAT, SS | 29 | 33 | Washer | 8 | 34 | ADJ, HANDLE, COMPRESSION, | 1 | 35 | Extension,, Handle, Adj | 1 | 36 | Assembly, ADJ HANDLE END, SLEEVE | 1 | 37 | Sleeve, Tube, Insert | 2 | 38 | SUPPORT, CAM, TOP PLATE | 1 | 39 | SPACER, SLEEVE, M16X20 | 1 | 40 | PULLEY, 89MM | 5 | 41 | NUT, M8, NYLON PATCH, SS | 5 | 42 | Nut, Nylon | 13 | 43 | Screw | 6 | 44 | Screw | 5 | 45 | SCREW,MI0XI.5,35MM,BHC,HE,SS | 4 | 46 | SCREW, M10X70, BHC, SS | 2 | 47 | SCREW, M10X250, BH, SS | 2 | 48 | SCREW, M10X55, BHC, SS | 3 | 49 | Screw | 6 | 50 | Screw | 8 | 51 | SPACER, 20.5ID X 12MM | 6 | 52 | CAM, IN-D2110, LEFT | 1 | 53 | CAM, IN-D2110, RIGHT | 1 | 54 | SHAFT, 25.4 OD X 69MM | 2 | 55 | PLATE, ADJUSTMENT, IN-D2110 | 2 | 56 | ARM, IN-D2110, LEFT | 1 | 57 | ARM, IN-D2110, RIGHT | 1 | 58 | HANDLE, RUBBER, GRIP, SLEEVE | 4 | 59 | GASKET, BASE HANDLE, IN-D2110 | 2 | 60 | Assembly, TOP PLATE, 15H, IN-D3340 | 1 | 61 | WASHER, M11 X 38OD | 6 | 62 | BUMPER, STACK, 25.4MM | 2 | 63 | STICKER,ADJUST FUNCTION,INSTRUCTION | 2 | 64 | STICKER,ADJUST FUNCTION,INSTRUCTION | 2 | 65 | PAD,FOOT,FRAME,WELDED | 1 | 66 | RETAINING SNAP, HOLE DIA 47MM | 8 | 67 | Assembly, CABLE, IN-D2110 (3835MM) | 1 | 68 | SLEEVE,STOPPER | 2 | 69 | BRACKET, MOVING, PULLEY | 1 | 70 | BUSHING, 1.0, BRONZE | 4 | 71 | WEIGHT STACK, GUIDE ROD, D2110 | 2 | 72 | BEARING, 6004 | 8 | 73 | SCREW,M4XO 7,15MM,SHCS,HE,SS | 2 | 74 | NUT, FLANGE, 1/2" - 12 | 2 | |
|
