COVER,PULLEY,5"
This part is NO LONGER AVAILABLE. You cannot purchase this part.
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | LABEL, SAFETY, KEEP HANDS, LARGE | 2 | 2 | WARNING STICKER-BOLT DOWN | 1 | 3 | BHSCS, 5/16-18 X 3/4, BRIGHT, Z | 2 | 4 | Washer, Flat | 10 | 5 | SERIAL NUMBER | 1 | 6 | Assembly, WELD, WT STACK CONN, SIDE | 1 | 7 | NUT,NYLOC,JAM,3/8-16,Z | 14 | 8 | WASHER, USS, 3/8, Z | 39 | 9 | Assembly, WELD, ADJUST HANDLE | 1 | 10 | ROM ADJUST ARM, S1305 | 1 | 11 | WASHER, ?, SAE,STL,Z | 10 | 12 | Nut, JAM, 1/4-20,Z | 9 | 13 | BHSCS, 3/8-24 X 1 1/2, BRIGHT, Z | 6 | 14 | BHSCS, 3/8-16 X 3/4, BRIGHT, Z | 1 | 15 | Assembly, WELD, TROLLEY, 18 INCH | 1 | 16 | Assembly, WELD, SEAT, S1305 | 1 | 17 | BUSHING, SEAT POST | 1 | 18 | Assembly, WELD, ROM, LEG PRESS | 1 | 19 | PIN, ROM RELEASE, .50 DIA | 1 | 20 | BEARING, FLANGE, .750 B X | 2 | 21 | BHSCS,3/8-16 X 3, Z | 9 | 22 | BELT CLAMP, 1.25 x 2.88 X .25, .27 THRU | 1 | 23 | BELT CLAMP, 1.25 x 2.88 X .25, 1/4-20 TAP | 1 | 24 | BHSCS,1/4-20 X 1, Z, BHC | 4 | 25 | BHSCS, 1/2-13 X 4 3/4, BRIGHT, Z | 1 | 26 | Washer | 2 | 27 | Nut | 1 | 28 | BHSCS,1/4-20 X 1, Z, BHC | 4 | 29 | NUT, NYLOC, 5/16-18, NE, Z | 2 | 30 | LINK, CHAIN, #40, PL-170 | 1 | 31 | Bearing, Linear | 4 | 32 | 1/8X3/8,DOWEL PIN | 4 | 33 | Pulley, Belt, 5.0d x 3/8b x 3.88w | 1 | 34 | Shaft, Linear | 2 | 35 | RACE, INNER, 1 X 4 1/8 | 1 | 36 | RING,RETAIN,1" EXT,5100-100 | 2 | 37 | 3/8-16 X 5, BRIGHT, Z | 1 | 38 | Label, Instructional, 1-9 Strip | 1 | 39 | BHSCS,1/4-20 X 2.5, Z | 1 | 40 | NLA COVER,PULLEY,5" | 2 | 41 | Assembly, UPHOLSTERY, SEAT | 1 | 42 | CARRIAGE SCREW, 1/4-20 X .75 | 8 | 43 | Assembly, WELD, WT STACK CONN, LOW | 1 | 44 | STANDOFF, 2", ALUMINUM | 6 | 45 | Pulley, Belt | 1 | 46 | Call For Info | 1 | 47 | PULLEY, BELT, 3.75D,3/8B, | 1 | 48 | NLA STEP,RUBBER,32X21,U-0065 | 1 | 49 | PLATE, FLOOR GUARD | 1 | 50 | Stop, Red | 1 | 51 | STOP PLATE, LINEAR SHAFT | 2 | 52 | Assembly, WELD, MAIN FRAME, S1305 | 1 | 53 | LABEL, SAFETY, MAIN WARNI | 1 | 54 | PLAC,IMPACT,PR-S1305, | 1 | 55 | LABEL,NAME, SEATED LEG PR | 2 | 56 | Logo, Lower Shroud | 1 | 57 | LOGO,STAR TRAC,TOP SHRD | 2 | 58 | Shroud, Lower Outside | 1 | 59 | Pulley, Belt | 2 | 60 | PLATE, KICK PLATE | 1 | 61 | Call For Info | 1 | 62 | SHROUD, UPPER, IMPACT | 2 | 63 | U-NUT, #8, PANEL .025-.12 | 14 | 64 | SCREW, #8-18 X 1-1/2, PHT | 14 | 65 | BHSCS,1/4-20 X 1/2 | 2 | 66 | Call For Info | 1 | 67 | U-NUT,1/4-20,EDGE,.531 | 2 | 68 | BHSCS, 3/8-16 X 2 1/2, BRIGHT, Z | 1 | 69 | BHSCS, 5/16-18 X 2 3/4, BRIGHT, Z | 2 | 70 | BHSCS, 5/16-18 X 1 1/4, BRIGHT,Z | 6 | 71 | BRKT,MNT,KICK PLATE, IMPACT | 2 | 72 | CAP, HANDLE, 3/4" | 1 | 73 | SSS, 10-32 X 1/8, Black | 10 | 74 | CAP, HANDLE, 1.00 GEC-1 CHRM | 2 | 75 | TUBE, GRIP, 1", Black X 8 9/16" | 12 | 76 | RING, HANDLE, 1" | 2 | 77 | 2 X 4 BLACK END CAP | 1 | 78 | TUBE, ROUND, 3/4" RUBBER, Black | 8 | 79 | 5/16ID X 1 1/2 HOLLOW ROD | 1 | 80 | Assembly, UPH, 27x22 | 1 | 81 | SPRING, PULL PIN | 1 | 82 | Belt, Weight | 189 | 83 | UPHOLSTERY, TBD | 2 | 84 | POWDER COAT, TBD | 3 | 85 | BHSCS,3/8-16 X 2 1/4, Z | 3 | 86 | CAP,2.0X3.0,BLACK,TEXTURED | 2 | 87 | HEX, CAP, PULL PIN | 1 | |
|